Home

Qualification Available now

MSF30422 Certificate III in Glass and Glazing RPL

MSF30422 Certificate III in Glass and Glazing is the national trade qualification for people who process, move and install glass. If you've spent years cutting, fitting and installing glass, RPL can recognise those skills towards it. A partner RTO assesses your evidence against each unit, and gap training may be needed.

Start my Free Skills Review

Free · Confidential · No obligation

Who MSF30422 is for.

training.gov.au describes MSF30422 as reflecting the role of people who manufacture, process, move or install glass products, in glass processing, glazing or designed glazing, across residential and commercial work.

In practice, that covers a wide range of experienced workers:

  • glaziers installing residential windows, doors and shower screens
  • commercial glaziers fitting shopfronts, curtain walls and structural glazing
  • glass processors cutting, edging, toughening or laminating glass in a factory
  • leadlight and decorative glass makers
  • people who fabricate and install insect and security screens

If you've done this work for years without a formal qualification, you're the person RPL is built for. You're not starting from zero. You're showing an assessor what you already do.

What's in MSF30422.

MSF30422 has 23 units: 8 core units and 15 electives. The electives come from groups, and the packaging rules set how many you take from each:

  • 1 unit only from Group A (a work safety unit)
  • at least 8 units in any combination from Groups B, C, D or E
  • up to 6 more from Groups B to F, or other relevant endorsed units

Group C covers glass processing, Group D covers glazing and installation, and Group E covers designed glazing such as leadlight. The qualification can also be awarded with a specialisation when your electives meet that specialisation's rules. These are the core units every candidate is assessed against:

MSF30422 Certificate III in Glass and Glazing core units (release 3). Source: training.gov.au, checked 2026-11-16.
CodeUnit
HLTAID011Provide first aid
MSFGG2014Cut thin glass by hand
MSFGG2015Process glass by basic machines
MSFGG3039Manually move glass
MSFGN2001Make measurements and calculations
MSMENV272Participate in environmentally sustainable work practices
MSMSUP102Communicate in the workplace
MSMSUP106Work in a team

How your work lines up.

Here's how common glazing work maps to units in the qualification. Your own mix depends on what you actually do.

Work you doUnits it relates to
Cutting glass by hand and running basic processing machinesMSFGG2014 Cut thin glass by hand, MSFGG2015 Process glass by basic machines
Moving sheets safely on site and in the workshopMSFGG3039 Manually move glass, MSFGG2013 Move single glass sheets by mechanical means
Installing windows, doors and shower screensMSFGG3034 Install residential windows and doors, MSFGG3033 Install shower screens
Commercial and structural glazingMSFGG3036 Install commercial glazing products, MSFGG3037 Install structural glazing products
Toughening, laminating or mirroring glassMSFGG3027 Toughen glass, MSFGG3026 Laminate glass, MSFGG3032 Mirror glass
Measuring up and working out materialsMSFGN2001 Make measurements and calculations, MSFGG3029 Assess glass and glazing requirements

MSF30422 and the NSW glazing licence.

In NSW, glazing is licensed trade work. For residential glazing worth more than $5,000 in labour and materials, you need a contractor licence, and NSW lists MSF30422 (and some earlier versions) as the qualification for it. The licence itself is a separate application to Building Commission NSW. For the full rules, see the Glass and Glazing Contractor Licence requirements.

Other states have their own rules, so check with the relevant regulator if you work outside NSW.

Evidence that helps.

Good evidence shows the range of your work and that it's current. Useful examples:

  • photos of installations you've completed, from residential windows to commercial fit-outs
  • measure-ups, cutting lists, quotes and job sheets
  • a statement of service or pay slips from glazing employers
  • references from supervisors or builders who've seen your work
  • tickets such as first aid, working at heights or forklift

First aid is a core unit, so a current first aid certificate is worth digging out early.

Choosing a specialisation.

MSF30422 can be awarded as a general qualification or with a specialisation, depending on your electives. The packaging rules set out three:

  • Glass Processing: all Group B electives and at least 6 Group C electives, including those the rules mark as required.
  • Glazing: all Group B electives and at least 6 Group D electives, including those the rules mark as required, plus at least one installation unit (MSFGG3033 to MSFGG3037).
  • Designed Glazing: at least 3 Group E electives, including those the rules mark as required.

Most installers fit the Glazing specialisation, and most factory workers fit Glass Processing. Leadlight and decorative glass makers usually fit Designed Glazing. We'll help you work out which suits your evidence.

Is RPL right for you?

RPL suits glaziers who have done the work across a range of jobs and can show it. If you've only done one narrow task, such as cutting in a factory, you may have more gaps, and gap training may take longer. If you're early in the trade, an apprenticeship may suit you better. A Free Skills Review is a quick way to talk it through.

What the assessment involves.

The partner RTO looks at your evidence unit by unit. It may ask you questions about how you'd handle a job, or watch you carry out a task such as measuring up or installing a unit. The aim is to confirm you can do the work to the standard, not to catch you out.

How RPL works for glaziers.

You start with a Free Skills Review, then we help you choose your electives and gather evidence for each unit. A partner RTO assesses that evidence, which may include a conversation or watching you do a task. Where your work doesn't cover a unit, gap training may be needed. If the RTO assesses you as competent in every unit, it issues the qualification.

Many glaziers also work with joinery, for example windows, doors and shower screens. If that's you, have a look at the CPC31920 Certificate III in Joinery RPL pathway too. For what shapes the price, see the Certificate III RPL cost guide.

Qualifications gained through RPL are nationally recognised under the Australian Qualifications Framework (AQF). They are assessed and issued by partner Registered Training Organisations (RTOs). If your evidence doesn't cover every unit of competency, gap training may be needed.

Common questions.

How many units are in MSF30422?

23 units: 8 core and 15 electives, with packaging rules on which elective groups you choose from.

Can MSF30422 be awarded with a specialisation?

Yes. It can be awarded with a Glass Processing, Glazing or Designed Glazing specialisation if your electives meet that specialisation's rules.

Do I need MSF30422 for a NSW glazing licence?

NSW lists MSF30422, along with some earlier versions and older qualifications, for a glazing contractor licence for residential work worth more than $5,000. The licence is a separate application, and individual applicants need a National Police Check.

Can RPL recognise my work?

RPL can recognise skills you already have towards MSF30422. A partner RTO assesses your evidence against each unit, and gap training may be needed. The outcome is not guaranteed.

How do I start?

Start a Free Skills Review. It's a preliminary discussion, not a formal assessment and not a guarantee of outcome.

Sources.

Start my Free Skills Review