Home

Licensing

NSW Glazing Licence: RPL Towards MSF30422

To hold a NSW glazing licence for work worth more than $5,000, you need an accepted qualification, usually MSF30422 Certificate III in Glass and Glazing, and individual applicants need a National Police Check. RPL can recognise your glazing experience towards MSF30422. A partner RTO assesses it, and gap training may be needed.

Start my Free Skills Review

Free · Confidential · No obligation

Do you need a licence for glazing in NSW?

Yes, for residential work worth more than $5,000 in labour and materials (including GST). Above that, you need a contractor licence to do the work, contract for it or advertise it. The rules below come from the NSW Government's glazing page, which is managed by Building Commission NSW.

NSW defines glazing as installing glass, acrylic or similar materials in prepared openings. It covers:

  • windows, door panels and screens
  • fences, balustrades and partitions
  • preparing, fabricating and installing framing supports for glazing
  • installing prefabricated or pre-assembled windows

Licence types and what you need.

You can apply for an individual contractor licence, a company or partnership contractor licence, or a qualified supervisor certificate, for 1, 3 or 5 years. Which one suits you depends on whether you want to contract for the work, supervise it, do it, or a mix. Individual applicants also need a National Police Check no older than four months.

The official page lists a qualification for glazing and doesn't list a separate experience requirement. Check the official page before you apply, as the rules can change. These are the qualifications it accepts:

QualificationNotes
MSF30422 or MSF30418 Certificate III in Glass and GlazingCurrent and previous
MSF30413 or LMF30611 Certificate III in Glass and Glazing (Glazing)Earlier versions
LMF30602 Certificate III in Glass and GlazingOlder qualification
Glass and Glazing TAFE courses 7958, 2135 and 0109Older TAFE courses

If you've held an unrestricted endorsed contractor licence or qualified supervisor certificate in glazing before, NSW accepts it in place of the qualification. Apprentices and trainees can't be issued a licence until they finish.

What MSF30422 covers.

MSF30422 Certificate III in Glass and Glazing has 23 units: 8 core and 15 electives. The core units are the ones every candidate is assessed against:

MSF30422 Certificate III in Glass and Glazing core units (release 3). Source: training.gov.au, checked 2026-11-16.
CodeUnit
HLTAID011Provide first aid
MSFGG2014Cut thin glass by hand
MSFGG2015Process glass by basic machines
MSFGG3039Manually move glass
MSFGN2001Make measurements and calculations
MSMENV272Participate in environmentally sustainable work practices
MSMSUP102Communicate in the workplace
MSMSUP106Work in a team

NSW lists MSF30422 itself, not a particular specialisation. If you also want the qualification awarded with the Glazing specialisation, its packaging rules ask for all Group B electives and at least 6 Group D electives, including some the rules mark as required, plus at least one installation unit (MSFGG3033 to MSFGG3037). Glass Processing and Designed Glazing have their own rules.

Is RPL right for you?

RPL suits people who have been doing glazing work for a good while and can show it: the jobs, the range of work, and someone who can vouch for them. If you're still early in the trade, an apprenticeship may suit you better. A Free Skills Review is a quick way to talk that through.

Where RPL fits.

If you've been doing glazing work for years without the certificate, RPL can recognise those skills towards MSF30422. A partner RTO assesses your evidence against each unit. Gap training may be needed for any unit your work hasn't covered.

Evidence that usually helps:

  • photos of windows, shower screens, balustrades and shopfronts you've installed
  • measure-ups, cutting lists and quotes
  • references from employers or builders
  • tickets such as your White Card or forklift licence

How to apply for the licence.

  1. Hold an accepted qualification, or a previous unrestricted licence in glazing.
  2. Get a National Police Check no older than four months.
  3. Choose your licence type and a 1, 3 or 5 year term.
  4. Apply through Building Commission NSW, or start through Service NSW.

If you already hold a licence from another state or New Zealand, NSW has a separate mutual recognition process, and this category is included in the NSW Automatic Mutual Recognition scheme.

Read more about the MSF30422 Certificate III in Glass and Glazing via RPL. For whole builds, see the NSW Builder's Licence RPL pathway, and for what shapes the price, the Certificate III RPL cost guide.

Qualifications gained through RPL are nationally recognised under the Australian Qualifications Framework (AQF). They are assessed and issued by partner Registered Training Organisations (RTOs). If your evidence doesn't cover every unit of competency, gap training may be needed.

Common questions.

Do I need a licence for glazing in NSW?

Yes, if it's residential work worth more than $5,000 in labour and materials (including GST). You need a contractor licence to do, contract for or advertise that work.

Which qualification does NSW accept?

The current qualification listed is MSF30422 Certificate III in Glass and Glazing. Several older versions and TAFE courses are also accepted. The full list is on the official NSW page.

Can RPL get me the qualification?

RPL can recognise skills you already have towards MSF30422. A partner RTO assesses your evidence against every unit, and gap training may be needed. The outcome is not guaranteed.

Does glazing include installing windows?

Yes. NSW glazing work includes installing prefabricated or pre-assembled windows, and preparing, fabricating and installing framing supports for glazing.

Sources.

Start my Free Skills Review