Home

Qualification Available now

CPC40920 Certificate IV in Plumbing and Services RPL

CPC40920 Certificate IV in Plumbing and Services is the qualification for plumbers stepping up to design, estimating and supervision. In NSW it's the qualification listed for a contractor licence for the main plumbing categories. If you're an experienced licensed tradesperson, RPL can recognise your skills towards it. A partner RTO assesses your evidence, and gap training may be needed.

Start my Free Skills Review

Free · Confidential · No obligation

Who CPC40920 is for.

training.gov.au describes CPC40920 as reflecting the role of an experienced plumbing service operator with advanced technical skills or responsibility for project design and supervision, or a hydraulic consultant who designs hydraulic systems. Occupational titles include plumbing contractor and hydraulic designer.

For the operations stream, there's an entry requirement: you must hold a Certificate III in Plumbing, or be authorised to do plumbing work by an Australian regulator or licensing body. This isn't a first qualification. It's the next step for qualified plumbers.

It suits plumbers who:

  • run jobs, price work and deal with builders and clients
  • supervise apprentices and other tradespeople
  • design and size drainage, water, sanitary or gas systems
  • want to move from a tradesperson certificate to a contractor licence

What's in CPC40920.

CPC40920 has 15 units: 10 core units and 5 electives. The electives follow different rules depending on the award. For the Operations award, you need at least 1 elective from Group B, with the remaining 4 from Group A or Group B. For Hydraulic services design, the electives come from Group A and can't come from Group B. In both, 2 units may be replaced by units from other training packages or accredited courses at Certificate IV level and above. In NSW, the licence page lists the Operations award, so plumbers aiming for a licence need their electives to make up that award.

These are the core units:

CPC40920 Certificate IV in Plumbing and Services core units (release 4). Source: training.gov.au, checked 2026-11-16.
CodeUnit
BSBESB402Establish legal and risk management requirements of new business ventures
CPCCBC4012Read and interpret plans and specifications
CPCPCM4011Carry out work-based risk control processes
CPCPCM4012Estimate and cost work
CPCPCM4015Access and interpret regulatory requirements for the plumbing and services industry
CPCPDR4011Design and size sanitary drainage systems
CPCPDR4012Design and size stormwater drainage systems
CPCPGS4011Design and size consumer gas installations
CPCPSN4011Design and size sanitary plumbing systems
CPCPWT4011Design and size heated and cold-water services and systems

How your work lines up.

Work you doUnits it relates to
Quoting and pricing jobsCPCPCM4012 Estimate and cost work
Working through plans and specificationsCPCCBC4012 Read and interpret plans and specifications
Sizing drainage for new workCPCPDR4011 Design and size sanitary drainage systems, CPCPDR4012 Design and size stormwater drainage systems
Sizing hot and cold water servicesCPCPWT4011 Design and size heated and cold-water services and systems
Gas installationsCPCPGS4011 Design and size consumer gas installations
Running the business sideBSBESB402 Establish legal and risk management requirements of new business ventures
Staying on top of codes and complianceCPCPCM4015 Access and interpret regulatory requirements for the plumbing and services industry

CPC40920 and the NSW contractor licence.

NSW needs a licence or certificate for any plumbing, draining or gasfitting work, whatever it costs. For a contractor licence or qualified supervisor certificate, NSW lists Certificate IV in Plumbing and Services (Operations), CPC40920 or later, plus at least two years of eligible, paid experience. The licence is a separate application to Building Commission NSW, and the experience is assessed with it. For the full rules, see the Plumbing Contractor Licence requirements.

Evidence that helps.

  • quotes, estimates and invoices you've prepared
  • plans, hydraulic drawings and sizing calculations you've worked from or produced
  • compliance certificates and inspection paperwork
  • evidence of supervising apprentices or other trades
  • your Certificate III in Plumbing or current licence details
  • references from contractors you've worked for

The electives.

These are the electives on the qualification's list, with their groups. The pathway you're on decides which you can choose.

CPC40920 Certificate IV in Plumbing and Services elective units (release 4). Source: training.gov.au, checked 2026-11-16.
CodeUnitGroup
BSBESB403Plan finances for new business venturesGroup A
CPCCBC4002Manage work health and safety in the building and construction workplaceGroup A
CPCCBC4019Apply sustainable building design principles to water management systemsGroup A
CPCCBC4024Resolve business disputesGroup A
CPCPCM4013Produce 2-D architectural drawings using design softwareGroup A
CPCPDR4013Design and size domestic treatment plant disposal systemsGroup A
CPCPPS5033Design vacuum sewerage systemsGroup A
CPCPFS4024Design residential fire sprinkler systemsGroup A
CPCPMS4011Design, size and lay out heating and cooling systemsGroup A
CPCPMS4023Design compressed air systemsGroup A
CPCPRF4011Design and size roof drainage systemsGroup A
CPCPCM2043Carry out WHS requirementsGroup B
CPCPDR3023Install on-site domestic wastewater treatment plants and disposal systemsGroup B
CPCPFS3037Install residential life safety sprinkler systemsGroup B
CPCPFS4021Commission domestic and residential fire suppression sprinkler systemsGroup B
CPCPGS3053Disconnect and reconnect Type A gas appliancesGroup B
CPCPGS4022Service Type A gas appliancesGroup B
CPCPGS4023Install, commission and service Type B gas appliancesGroup B
CPCPMS4022Commission air and water systemsGroup B
CPCPWT3022Install and commission water heating systems and adjust controls and devicesGroup B
CPCPWT3027Install backflow prevention devicesGroup B
CPCPWT4022Commission and maintain backflow prevention devicesGroup B
CPCPWT4023Commission and maintain hot and heated water temperature control devicesGroup B
UEERL0004Disconnect-reconnect electrical equipment connected to low voltage (LV) installation wiringGroup B

For a NSW contractor licence, your electives need to make up the Operations award. We'll help you choose units that match the work you do.

How RPL works for plumbers.

Start with a Free Skills Review. We then help you confirm the pathway and electives and gather evidence for each unit. A partner RTO assesses your evidence, which can include questions about your design and sizing decisions. Gap training may be needed where your work hasn't covered a unit, for example a design unit for a system type you rarely size. If the RTO assesses you as competent in every unit, it issues the qualification.

Plumbers who also build may want to read about the NSW Builder's Licence RPL pathway. For what shapes the price, see the Certificate IV RPL cost guide.

Qualifications gained through RPL are nationally recognised under the Australian Qualifications Framework (AQF). They are assessed and issued by partner Registered Training Organisations (RTOs). If your evidence doesn't cover every unit of competency, gap training may be needed.

Common questions.

Do I need a Certificate III first?

For the operations stream, yes. The qualification says you must hold a Certificate III in Plumbing or be authorised to do plumbing work by an Australian regulator or licensing body.

How many units are in CPC40920?

15 units: 10 core and 5 electives. The elective rules differ between the operations stream and hydraulic services design.

Does CPC40920 get me a NSW contractor licence?

It's the qualification NSW lists, but the licence also needs at least two years of eligible, paid experience, and you apply to Building Commission NSW separately.

Can RPL recognise my work?

RPL can recognise skills you already have towards CPC40920. A partner RTO assesses your evidence against each unit, and gap training may be needed. The outcome is not guaranteed.

How do I start?

Start a Free Skills Review. It's a preliminary discussion, not a formal assessment and not a guarantee of outcome.

Sources.

Start my Free Skills Review