Home

Licensing

NSW Joinery Licence: RPL Towards CPC31920

To hold a NSW joinery licence for work worth more than $5,000, you need an accepted qualification, such as CPC31920 Certificate III in Joinery, and individual applicants need a National Police Check. RPL can recognise your joinery experience towards CPC31920. A partner RTO assesses it, and gap training may be needed.

Start my Free Skills Review

Free · Confidential · No obligation

Do you need a licence for joinery in NSW?

Yes, for residential work worth more than $5,000 in labour and materials (including GST). Above that, you need a contractor licence to do the work, contract for it or advertise it. The rules below come from the NSW Government's joinery page, which is managed by Building Commission NSW.

NSW defines joinery as making and installing non-structural timber, timber composite or metal parts of buildings. It includes:

  • doors, windows, stairs and prefabricated glass fencing
  • built-in furniture such as cupboards, wardrobes and entertainment units, usually made off site
  • shower screens and internal timber cladding for walls and ceilings

Licence types and what you need.

You can apply for an individual contractor licence, a company or partnership contractor licence, or a qualified supervisor certificate, for 1, 3 or 5 years. Which one suits you depends on whether you want to contract for the work, supervise it, do it, or a mix. Individual applicants also need a National Police Check no older than four months.

The official page lists a qualification for joinery and doesn't list a separate experience requirement. Check the official page before you apply, as the rules can change. These are the qualifications it accepts:

QualificationNotes
CPC31920 Certificate III in JoineryCurrent
CPC30220 Certificate III in CarpentryListed by NSW. Superseded nationally by CPC30326
CPC30120 Certificate III in ShopfittingListed by NSW
MSF30322 Certificate III in Cabinet Making and Timber TechnologyFurniture, kitchens and bathrooms, or wood machining
MEM30719 Certificate III in Marine Craft ConstructionListed by NSW
MSF30313 Certificate III in Timber and Composites MachiningListed by NSW

NSW also lists many earlier versions and TAFE courses on its page. If you've held an unrestricted endorsed contractor licence or qualified supervisor certificate in joinery before, NSW accepts it in place of the qualification. Apprentices and trainees can't be issued a licence until they finish.

What CPC31920 covers.

CPC31920 Certificate III in Joinery has 29 units: 18 core and 11 electives. The core units are the ones every candidate is assessed against:

CPC31920 Certificate III in Joinery core units (release 4). Source: training.gov.au, checked 2026-11-16.
CodeUnit
CPCCCA2002Use carpentry tools and equipment
CPCCCA2011Handle carpentry materials
CPCCCA3010Install windows and doors
CPCCCM2006Apply basic levelling procedures
CPCCCM2012Work safely at heights
CPCCCM3004Identify and apply information in construction plans, drawings and specifications
CPCCJN2003Package manufactured products for transport
CPCCJN3002Use computer-controlled machinery
CPCCJN3004Manufacture and assemble joinery components
CPCCJN3100Process materials to produce components using static machines
CPCCJS3002Manufacture stair components for straight flighted stairs
CPCCOM1012Work effectively and sustainably in the construction industry
CPCCOM1013Plan and organise work
CPCCOM1014Conduct workplace communication
CPCCOM1015Carry out measurements and calculations
CPCCOM2001Read and interpret plans and specifications
CPCCOM3001Perform construction calculations to determine carpentry material requirements
MSFFM3011Measure and draw site layout for manufactured furniture products

Is RPL right for you?

RPL suits people who have been doing joinery work for a good while and can show it: the jobs, the range of work, and someone who can vouch for them. If you're still early in the trade, an apprenticeship may suit you better. A Free Skills Review is a quick way to talk that through.

Where RPL fits.

If you've been doing joinery work for years without the certificate, RPL can recognise those skills towards CPC31920. A partner RTO assesses your evidence against each unit. Gap training may be needed for any unit your work hasn't covered.

Evidence that usually helps:

  • photos of stairs, doors, windows and built-ins you've made and fitted
  • shop drawings, cutting lists and quotes
  • references from your workshop or builders
  • tickets such as your White Card

How to apply for the licence.

  1. Hold an accepted qualification, or a previous unrestricted licence in joinery.
  2. Get a National Police Check no older than four months.
  3. Choose your licence type and a 1, 3 or 5 year term.
  4. Apply through Building Commission NSW, or start through Service NSW.

If you already hold a licence from another state or New Zealand, NSW has a separate mutual recognition process, and this category is included in the NSW Automatic Mutual Recognition scheme.

Read more about the CPC31920 Certificate III in Joinery via RPL. For whole builds, see the NSW Builder's Licence requirements, and for what shapes the price, the RPL certificate cost guide.

Qualifications gained through RPL are nationally recognised under the Australian Qualifications Framework (AQF). They are assessed and issued by partner Registered Training Organisations (RTOs). If your evidence doesn't cover every unit of competency, gap training may be needed.

Common questions.

Do I need a licence for joinery in NSW?

Yes, if it's residential work worth more than $5,000 in labour and materials (including GST). You need a contractor licence to do, contract for or advertise that work.

Which qualification does NSW accept?

The current qualification listed is CPC31920 Certificate III in Joinery. Several older versions and TAFE courses are also accepted. The full list is on the official NSW page.

Can RPL get me the qualification?

RPL can recognise skills you already have towards CPC31920. A partner RTO assesses your evidence against every unit, and gap training may be needed. The outcome is not guaranteed.

Can a cabinet maker get a joinery licence?

NSW accepts several cabinet making qualifications for joinery, including MSF30322 Certificate III in Cabinet Making and Timber Technology in its furniture, kitchens and bathrooms, and wood machining streams.

Sources.

Start my Free Skills Review