Home

Licensing

NSW Bricklaying Licence: RPL Towards CPC33020

To hold a NSW bricklaying licence for work worth more than $5,000, you need an accepted qualification, usually CPC33020 Certificate III in Bricklaying and Blocklaying, and individual applicants need a National Police Check. RPL can recognise your bricklaying experience towards CPC33020. A partner RTO assesses it, and gap training may be needed.

Start my Free Skills Review

Free · Confidential · No obligation

Do you need a licence for bricklaying in NSW?

Yes, for residential work worth more than $5,000 in labour and materials (including GST). Above that, you need a contractor licence to do the work, contract for it or advertise it. The rules below come from the NSW Government's bricklaying page, which is managed by Building Commission NSW.

NSW defines bricklaying as building structures from bricks or blocks. It includes:

  • brick fences and their footings, where the footings carry only the brickwork, gates or decorative features
  • brick retaining walls that don't need approval under the Local Government Act 1993
  • flashing that goes with bricklaying
  • minor concreting that supports the brickwork, such as footings for free-standing fences

It doesn't include structural concreting such as slabs, or concrete footings for the walls of a home.

Licence types and what you need.

You can apply for an individual contractor licence, a company or partnership contractor licence, or a qualified supervisor certificate, for 1, 3 or 5 years. Which one suits you depends on whether you want to contract for the work, supervise it, do it, or a mix. Individual applicants also need a National Police Check no older than four months.

The official page lists a qualification for bricklaying and doesn't list a separate experience requirement. Check the official page before you apply, as the rules can change. These are the qualifications it accepts:

QualificationNotes
CPC33020 Certificate III in Bricklaying and BlocklayingCurrent
CPC30111, CPC30108, BCG30103 Certificate III in Bricklaying/BlocklayingEarlier versions
BCG30698 Certificate III in General Construction (Bricklaying/Blocklaying)Older qualification
Bricklaying Trade TAFE courses 2160 and 5159Older TAFE courses

If you've held an unrestricted endorsed contractor licence or qualified supervisor certificate in bricklaying before, NSW accepts it in place of the qualification. Apprentices and trainees can't be issued a licence until they finish.

What CPC33020 covers.

CPC33020 Certificate III in Bricklaying and Blocklaying has 28 units: 20 core and 8 electives. The core units are the ones every candidate is assessed against:

CPC33020 Certificate III in Bricklaying and Blocklaying core units (release 5). Source: training.gov.au, checked 2026-11-16.
CodeUnit
CPCCBL2001Handle and prepare bricklaying and blocklaying materials
CPCCBL2002Use bricklaying and blocklaying tools and equipment
CPCCBL3002Carry out masonry veneer construction
CPCCBL3003Carry out cavity brick construction
CPCCBL3005Lay masonry walls and corners
CPCCBL3006Lay multi-thickness walls and piers
CPCCBL3009Install flashings and damp proof course
CPCCBL3010Construct masonry arches
CPCCBL3011Construct curved walls
CPCCBL3013Construct masonry structural systems
CPCCCA3002Carry out setting out
CPCCCM2006Apply basic levelling procedures
CPCCCM2008Erect and dismantle restricted height scaffolding
CPCCCM2012Work safely at heights
CPCCOM1012Work effectively and sustainably in the construction industry
CPCCOM1013Plan and organise work
CPCCOM1014Conduct workplace communication
CPCCOM1015Carry out measurements and calculations
CPCCOM2001Read and interpret plans and specifications
CPCCWHS2001Apply WHS requirements, policies, and procedures in the construction industry

Is RPL right for you?

RPL suits people who have been doing bricklaying work for a good while and can show it: the jobs, the range of work, and someone who can vouch for them. If you're still early in the trade, an apprenticeship may suit you better. A Free Skills Review is a quick way to talk that through.

Where RPL fits.

If you've been doing bricklaying work for years without the certificate, RPL can recognise those skills towards CPC33020. A partner RTO assesses your evidence against each unit. Gap training may be needed for any unit your work hasn't covered.

Evidence that usually helps:

  • photos of walls, fences, piers and feature brickwork you've laid
  • plans you've set out from and quotes
  • references from builders who've seen your work
  • tickets such as your White Card or scaffolding

How to apply for the licence.

  1. Hold an accepted qualification, or a previous unrestricted licence in bricklaying.
  2. Get a National Police Check no older than four months.
  3. Choose your licence type and a 1, 3 or 5 year term.
  4. Apply through Building Commission NSW, or start through Service NSW.

If you already hold a licence from another state or New Zealand, NSW has a separate mutual recognition process, and this category is included in the NSW Automatic Mutual Recognition scheme.

Concreting is a separate class: see the NSW Concreting Contractor Licence guide. A bricklaying licence also counts towards the NSW Builder's Licence RPL requirements. For what shapes the price, see what affects RPL costs.

Qualifications gained through RPL are nationally recognised under the Australian Qualifications Framework (AQF). They are assessed and issued by partner Registered Training Organisations (RTOs). If your evidence doesn't cover every unit of competency, gap training may be needed.

Common questions.

Do I need a licence for bricklaying in NSW?

Yes, if it's residential work worth more than $5,000 in labour and materials (including GST). You need a contractor licence to do, contract for or advertise that work.

Which qualification does NSW accept?

The current qualification listed is CPC33020 Certificate III in Bricklaying and Blocklaying. Several older versions and TAFE courses are also accepted. The full list is on the official NSW page.

Can RPL get me the qualification?

RPL can recognise skills you already have towards CPC33020. A partner RTO assesses your evidence against every unit, and gap training may be needed. The outcome is not guaranteed.

Can a bricklayer pour slabs and footings?

Not under the bricklaying licence. It excludes structural concreting such as slabs and footings for dwelling walls, except footings for free-standing fences or walls that only carry their own weight.

Sources.

Start my Free Skills Review